Key takeaways
- Clean first, brighten, let the wood dry fully, then stain or seal.
- Use low pressure and move with the grain to avoid marks.
- Penetrating stains wear evenly and are easier to refresh than film coatings.
- Composite decks need cleaning, not sealing.
Wash gently
Wood fibers are soft, so high pressure leaves furry, striped surfaces. Use a wide tip, low pressure and a cleaner that lifts mildew and old finish. Keep the wand moving with the grain and a consistent distance from the boards.
Cover or protect plants and siding.
Brighten and dry
A wood brightener restores color and neutralizes cleaner. After rinsing, the wood must dry fully, often one to three days, before it takes stain. Moisture testing helps. Stain over damp wood can peel or look blotchy.
Do not rush this step.
Stain or seal
A penetrating stain soaks in and wears gradually, so refreshing means cleaning and recoating. Film-forming coatings can peel and require stripping. Apply thin, even coats and back-brush so the stain works into the grain.
The USDA Forest Products Laboratory has helpful finishing guidance.
Composite and PVC decks
Composite decking should not be sealed or stained. It benefits from a yearly wash with a composite-safe cleaner and a soft brush to prevent mold spots and fading. Follow the manufacturer care advice.
Avoid high pressure on composite.
Official sources and further reading
These are independent organizations. Links open in a new tab.
Quick answers
How often should I restain?
Many decks need a refresh every two to three years, depending on sun and product.
Can I stain right after washing?
No. The wood has to dry first, often a day or more.




